CATLINK Scooper Luxury Pro-X (CL-07/CL-08)

CATLINK Scooper Luxury Pro-X is a rotating globe box for cats of 3.3 to 22 lb, as claimed. Its sources confirm 5 of 6 safety layers: weight sensor, entry sensor, anti-pinch, cycle delay, stop button. Not confirmed yet: open entry. Sources give different values for minimum cat weight, claimed (both shown below).

16 of 22 fields sourcedData checked October 2026

Spec sheet

Manufacturer claims, not our measurements. Small numbers lead to the source list at the bottom of the page.

How it cleans
Rotating globe1
Minimum cat weight, claimed
Brand site: 3.3 lb (1.5 kg) claimed21. Also stated (same brand page bullet '3 lbs 8 oz'): 3.5 lb (1.6 kg) claimed2.
Heaviest cat
22 lb (10 kg) claimed21
Entry height
14 in (35.6 cm) claimed2
Drum or tray volume
65 L claimed2
Waste drawer
13 L claimed2
Width
22.8 in (57.9 cm) claimed2
Depth
23.6 in (59.9 cm) claimed2
Height
28 in (71.1 cm) claimed2
Unit weight
24.3 lb claimed2
Noise
40 dB claimed2
Litter it takes
clumping litter (clay-clumping recommended) or mixed litter; two screens supplied (bentonite / mixed); not pure tofu or long-strip tofu; not non-clumping, newspaper or wood pellets12
App
CATLINK app1
Weight sensor
Yes21
Entry presence sensor
Yes (infrared)2
Anti-pinch
Yes21
Shortest delay before cleaning
5 min1
Stop button on the unit
Yes1
Warranty
12 months21
Drawer lasts, one cat
14 days claimed2

Not found in the sources yet: Entry, Cats per unit, Without Wi-Fi, FCC ID, Made by (FCC grantee), Bags and filters.

When it acts up

From the troubleshooting section of the manual, in plain words.

The globe stopped mid-cycle (radar or weight protection, or full waste drawer)

Why: Something moved or added weight inside during rotation, or the drawer is full.

What to do: Clear the cause, then press Clean/Pause once to cancel the stop.1

The globe stopped after the anti-pinch protection fired

Why: The anti-pinch device triggered; it only clears with human intervention.

What to do: Remove the obstruction, then press Clean/Pause once.1

The litter amount shown is inaccurate

Why: The litter level reference is off.

What to do: Empty all litter, long-press Mode until 2 beeps, then immediately long-press Mode again until 2 beeps to reset litter to zero.1

All 5 problems and fixes

Sources

  1. CATLINK AI Cat Litter Box (Pro-X) User Manual, p. 2-3, 7, 9, 11-12, 16-17, 19-21, checked Oct 8, 2026
  2. CATLINK US: Scooper Luxury Pro-X product page, specs, features, FAQ, checked Oct 8, 2026