PETKIT Purobot Ultra (T6)
PETKIT Purobot Ultra is a rotating drum box for cats of 3.3 to 22 lb, as claimed. Its sources confirm 3 of 6 safety layers: weight sensor, entry sensor, open entry. Not confirmed yet: anti-pinch, cycle delay, stop button.
Spec sheet
Manufacturer claims, not our measurements. Small numbers lead to the source list at the bottom of the page.
- How it cleans
- Rotating drum1
- Entry
- Open, nothing closes2
- Minimum cat weight, claimed
- 3.3 lb (1.5 kg) claimed2
- Heaviest cat
- 22 lb (10 kg) claimed2
- Entry height
- 10.4 in (26.5 cm) claimed2
- Drum or tray volume
- 70 L claimed2
- Waste drawer
- 10 L claimed2
- Width
- 20.9 in (53.2 cm) claimed2
- Depth
- 32.2 in (81.8 cm) claimed2
- Height
- 24.1 in (61.2 cm) claimed2
- Unit weight
- 32.2 lb claimed1
- Litter it takes
- clumping clay / tofu / mixed litter (length <=12 mm, diameter <=3 mm); mineral/bentonite with sifter P990322
- App
- PETKIT App1
- FCC ID
- 2A72N-P99033
- Made by (FCC grantee)
- PETKIT Network Technology (Shanghai) Co., Ltd.3
- Weight sensor
- Yes1
- Warranty
- 24 months6
- Drawer lasts, one cat
- 20 days claimed2
Not found in the sources yet: Cats per unit, Noise, Without Wi-Fi, Anti-pinch, Shortest delay before cleaning, Stop button on the unit, Bags and filters.
When it acts up
From the troubleshooting section of the manual, in plain words.
Unit will not turn on
Why: Plug not seated, dead socket, AI camera installed wrong, or non-original power cable
What to do: Reseat the plug, check the socket, power off and reinstall the camera with all four screws tight, use the original cable1
Cylinder does not rotate
Why: Not bound to the app, a pet inside, parts installed wrong, broken bag, full bin, refill ring problem, or debris at the cylinder gear
What to do: Bind the app first; wait for the pet to leave and double press OK; reinstall refill ring cover, ring and trunk; empty the bin; replace the refill ring; remove trunk and cylinder and clear debris near the gear1
Auto-packing fails
Why: Parts installed wrong, bags used up, or packing module (sealed door/slider) fault
What to do: Reinstall refill ring cover and trunk; replace the refill ring; remove the trunk, clear debris near the sealed door, lower the packing module by hand, power on and double press OK1
Sources
- PETKIT Purobot Ultra with Camera user manual EN V1.3, p. 4, 10, 36-38, checked Oct 8, 2026
- PETKIT Purobot Ultra product page, Specs, FAQ, comparison table, checked Oct 8, 2026
- fccid.io (mirror of FCC EAS), checked Oct 8, 2026
- PETKIT Purobot Ultra user manual V1.3, p. 4, checked Oct 8, 2026
- PETKIT Purobot Ultra product page, checked Oct 8, 2026
- PETKIT Warranty Policy, checked Oct 8, 2026